CZ all-in-one servo drive electric changing roll forming machine with automatic packing machine

1、Product specification: any transformation between ① C width (80-300mm) and Z width (120-300mm); any transformation between ② height (40-80mm); ③ small edge (10-20mm); ④ thickness t (1.5-3.0mm) adjustable

2、Production speed: 30 m / minute (according to the number of punched)

3、Materials applicable: Q195, Q235, Q355 hot rolled strip steel or hot rolled galvanized strip steel (1.5-3.0mm)

Send email to us

Product Detail

Product Tags

Hydraulic Decoiler

1、Load: 6 tons
2、Hold method:hydraulic station
3、Brake: the spindle is double held tight

Lever and punching hole unit

Lever 1 set

Punching hole unit 3 set

a single hole + double hole, round hole Φ 14mm and oval hole 26* 14mm.

Servo drive automatic roll Forming machine

1、Feed material: guide shaft + guide wheel.

2、Flat: upper three and four + two leads, full solid shaft modulation heat treatment and polishing plating.

3、Main molding: 18 components (one of them is 87-95 degrees)

4、 Equipped with 13 groups of CZ swap modules, rotate 180 degrees to complete the switching, through

5、Power button switch specification size.

6、Pressure reinforcement: one word straight tendon.

7、Straight: ten roll CZ special two axial straight + four roll two axial straight, a total of two straight units.

8、Lead: with transmission, upper and lower shaft gear drive.

9、Punch: after forming a single hole + double hole, round hole Φ 14mm and oval hole 26* 14mm.

10、Drive way

22KW servo motor drive + Shanghai Nanrui reducer (Changzhou Xintao reducer)

11、Roll: Material: GCr 15

12、Processing technology: numerical control processing after heat treatment to HRC 58-60, fine car re-polishing electroplating

13、Shaft: Material: 40 Cr

14、Processing technology: CNC modulation processing HRC 28-12, then refined CNC polishing electroplating

Cutting Unit

One set cutting blade for cutting off 80-300 size

Electric control system

1、Main control cabinet: 1

2、Change mode: (electric) change, (three change motor: 0.75 * 3kw)

3、Changing width cabinet: 1 (installed in middle of frame)

4、External controller: 1 (easy to control forward and backward during production and debugging)

5、Main accessories origin: PLC (Omron, Japan), drive (Inwitten), brake resistance (Inwitten), touch screen (mail), relay (Omron, Japan), proximity switch (South Korea), length encoder (Omron, Japan)