C all-in-one servo drive electric changing roll forming machine with automatic packing machine
1、Load: 6 tons
2、Hold method:hydraulic station
3、Brake: the spindle is double held tight
Lever 1 set
1.upper 3 roller and 4 down roller + two leading rollers
2.full solid shaft modulation heat treatment and polishing plating.
Punching hole unit 3 sets
1.a single hole + double hole,
2.round hole Φ 14mm
3.oval hole 26* 14mm.
1、Feed material: guide shaft + guide wheel.
2、Flat: upper three and four + two leads, full solid shaft modulation heat treatment and polishing plating.
3、Main molding: 18 components (one of them is 87-95 degrees)
4、 Equipped with 13 groups of CZ swap modules, rotate 180 degrees to complete the switching, through
5、Power button switch specification size.
6、Pressure reinforcement: one word straight tendon.
7、Straight: ten roll CZ special two axial straight + four roll two axial straight, a total of two straight units.
8、Lead: with transmission, upper and lower shaft gear drive.
9、Punch: after forming a single hole + double hole, round hole Φ 14mm and oval hole 26* 14mm.
10、Drive way
11、22KW servo motor drive + Shanghai Nanrui reducer (Changzhou Xintao reducer)
12、Roll: Material: GCr 15
13、Processing technology: numerical control processing after heat treatment to HRC 58-60, fine car re-polishing electroplating
14、Shaft: Material: 40 Cr
15、Processing technology: CNC modulation processing HRC 28-12, then refined CNC polishing electroplating
One set cutting blade for cutting off 80-300 size
1、Main control cabinet: 1
2、Change mode: (electric) change, (three change motor: 0.75 * 3kw)
3、Changing width cabinet: 1 (installed in middle of frame)
4、External controller: 1 (easy to control forward and backward during production and debugging)
5、Main accessories origin: PLC (Omron, Japan), drive (Inwitten), brake resistance (Inwitten), touch screen (mail), relay (Omron, Japan), proximity switch (South Korea), length encoder (Omron, Japan)
1、Hydraulic station: power 7.5KW
2、The fuel tank volume is 200 liters
3、Main origin: solenoid valve Beijing HUADE
1、output length: 6-12 meters
2、Supporting method: the frame body is welded with groove steel and Angle steel, and the roller is installed on the surface
3、Output Frame to move left and right
4、Up and down for output C channel
1、Tools: 1 set
2、Manual: one
Equipment color: main lake blue, rack ink gray
